You will notice that the weaving is consistently "over" then "under" each cross of the lines. The two rules to Celtic weaving are over and under throughout the piece, and no more than two lines may cross.
The Applique
Begin by laying the end of a bias strip in the center of one of the "under" crossings, seam side down. Have the the raw edge of the seam under the strip facing the outward curve of the weaving. This will give you more control in the curves. Using your best applique stitch, sew the INSIDE of the strip first.
You will not sew any strips together and you must end at an
"under" crossing. When you judge your strip will not reach the next "under" spot, stop at the current "under" position, clip
the strip off, and begin with a new strip. Remember there are no joining seams in the weaving and no ends showing. Always begin and end "under". "Ease in" the strip on the curves, and
make a miter on the points.
You will need to plan to keep a space open for another strip to go under when the strip you are appliqueing is going "over". Got that?? You really need to come over to my sewing room and we'll do this together!
At first I thought this Celtic weaving would surely be difficult, but with the use of bias bars or purchased bias tape, it is very satisfying handwork and the result is beautiful. Especially if you enjoy applique.
When the weaving is complete the block can be trimmed, placed on thin batting and backing fabric and finished with a quick turn, or matching binding. Or more blocks can be done and made into a wall hanging or quilt. I did some quilting on my blocks so the weaving would stand out.
And that is Celtic quilting. Hope you enjoy doing it and that the directions are clear.
Happy Celtic quilting!
And tell me how I'm doing by rating this article. Thank you! Merry Sunshine
 |
Go To Page: 1 2
| Here's the follow-up discussion on this article: | View all related messages |
For a complete listing of article comments, questions, and other discussions related to Jeanne Walsh's Quilting topic, please visit the Discussions page.